Activation Tab Area; New - Zeiss LSM 880 Operating Manual

LSM 880
5.3.15

Activation Tab Area

In the activation area you can select certain tabs to
be displayed in the tool area or no by just checking
the corresponding boxes (Fig. 338).
Those tools are mainly for Multidimensional
Acquisition, which are needed only in special cases.
5.3.16

New

If a measurement is triggered by pressing the Snap or Start Experiment button and no active FCS
diagram window is open in the Container, a new window will be opened displaying the count race
trace, correlation function, pulse density histogram and photon counting histogram as selected and the
measurement is recorded according to the System Configuration, Acquisition and Correlator
settings.
If one or more windows are open, the measurements will be added to the active window.
If you want to open a new window, o press the New button. This will open a new empty FCS diagram
window (Fig. 359).
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
Fig. 338 Activation tab area
ZEISS
253