Settings - Zeiss LSM 880 Operating Manual

ZEISS Center Screen Area / Image Containers - Display and Image Analysis
6.9.11

Settings

Fig. 660 3D Renderer Settings – Flying mode
Fig. 661 3D Renderer Settings – Split mode
Fig. 662 3D Renderer Settings – Stereo
The stereoscopic effect can only be seen with the aid of red/green 3D goggles. The red lens is to be used
for the right eye and the green lens for the left eye.
Camera offset: Defines the distance of both cameras from each other (units in meters).
Parallax shift: Determines the degree of shift which is necessary to correlate both camera views. The
slider should be adjusted to maximize the stereo effect. Please note, that this setting will be different for
each observer.
466
CHAPTER 1 - SYSTEM OPERATION
Flying mode
Ticking the tick box Flying mode activates the
mode, unticking deactivates it.
To show or hide an overview image tick the Show
overlay image box.
The fly-speed can be adjusted in a range from 1
to 100.
Split Mode
Ticking this tick box activates a channel wise 3D
split view of the data. This is only available in
surface render mode only. An overview image with
all channels combined can be shown optionally by
ticking Draw combined image.
Stereo
Two Stereo views can be chosen from this sub-
menu:
Anaglyph is a view in which the data can be
examined in 3D using red/green glasses. The image
is built up twice (once each for the red and green
colors), resulting in a stereoscopic image.
000000-2071-464
LSM 880
10/2014 V_01