Zeiss LSM 880 Operating Manual page 30

ZEISS
Fig. 14 Laser Off dialog box
24
CHAPTER 1 - SYSTEM OPERATION
Startup and Shutdown of the System
The Software can be shut down from File menu of
the Main toolbar by selecting Exit (Fig. 13) or by
pressing the Window Close button (symbolized
by a cross) of the ZEN window.
If in Maintain tab in the LSM Options dialog
window the box Laser off on Exit in the
Hardware tab is ticked, the lasers will be
automatically switched off when exiting the ZEN
program.
If the box is not ticked, the Laser Off dialog box
will appear that allows one to check on the listed
lasers (Fig. 14).
By the Power drop down menu, if available, the
laser can be left On, put in Standby or turned
Off. Those lasers, for which no Power drop down
menu is available, are switched off automatically
when not in use. By expanding the Laser properties
field you can few the current status of the selected
laser. Press Ok after having made the desired
changes to exit the ZEN software.
000000-2071-464
LSM 880
10/2014 V_01