Right Tool Area - Zeiss LSM 880 Operating Manual

ZEISS
Fig. 39 Right tool area (big view selected)
48
CHAPTER 1 - SYSTEM OPERATION
Introduction to the Software Application Layout
000000-2071-464
4.10

Right Tool Area

The Right Tool Area is used for displaying
and handling the opened images, e.g. save
or close. The view of this area can be varied
individually, e.g. expand or hide the area,
change between the view modes.
Expand slider
Dragging this slider to the left side expands
the Right Tool Area by decreasing the center
tool area.
Dragging the slider to the right side
decreases the Right Tool Area up to the
default size.
Save button
Saves the selected scanned or changed
image. The Save as dialog appears.
New image document button
Opens an empty image document in the
active container.
Close button
Closes the selected image. The Close image
dialog appears to close the image with or
without saving or to cancel the closing.
Textual View button
Shows images only
characters.
Thumbnail View button
Shows images with the textual characters
and an image thumbnail preview.
LSM 880
with the textual
10/2014 V_01