Startup And Shutdown Of The System; Startup Of The System; The Power Remote Switch - Zeiss LSM 880 Operating Manual

ZEISS
3

Startup and Shutdown of the System

3.1

Startup of the System

The LSM system is equipped with a main power switch and two further switches labeled System/PC and
Components that are located at the front of the System Electronic Rack. The main switch has to be set
to ON to be able to switch the system on and off using the System/PC and Components switches. The
main switch can be used to switch off the complete system with one switch only. The electronics to run
the computer and the microscope are switched on with the System/PC switch. The laser module and the
scan head are switched on with the Components switch. These switches are also accessible via the
power remote witch (Fig. 5).
Refer to the operating manual and CHAPTER 4: ANNEX for handling of any Titanium-Sapphire-Laser used
for Multiphoton (NLO) Microscopy.
1 Main switch ON/OFF
2 COMPONENTS switch ON/OFF
3
SYSTEM PC switch ON/OFF
Fig. 5 Power remote switch
18
CHAPTER 1 - SYSTEM OPERATION
Startup and Shutdown of the System
3.1.1
• To start the system switch the main switch
• When set to ON the power remote switch
• After switching on the computer type in the
• After entries, confirm by clicking the OK button
After complete startup, the computer is ready for
the components start.
• To switch on the system completely put the
000000-2071-464

The Power Remote Switch

(Fig. 5/1) to ON.
labeled System/PC (Fig. 5/3) provides power to
the computer. This allows using the computer
and ZEN software offline.
The drives for floppy discs and CD/DVD of
the computer must not contain any data
storage item.
user name and password to log on to the
computer.
or Enter.
− The WINDOWS operating system desktop
appears on the screen, showing a number of
icons.
Components switch (Fig. 5/2) also to ON. Now
the complete system is ready to be initialized
with the LSM Software.
LSM 880
10/2014 V_01