Zeiss LSM 880 Operating Manual page 73

LSM 880
Select the acquisition configuration from the
Parameters list by highlighting it or search for it
by typing its name in the Search field. An Info
menu pops up (Fig. 68). Press Yes to delete the
acquisition parameters,
parameters. Close the menu by pressing the cross
to abort the operation.
To save acquisition parameters press the Save
button ( ). This opens the Save Active
Acquisition Parameters as panel (Fig. 69). Type
in an appropriate name in the Name field and
press Ok to save the acquisition parameters in the
data base or press Cancel to abort the process.
Pressing the Smart Setup button will open the
Smart Setup panel. As this is an exclusive LSM
function the user is referred to section Smart
Setup for a detailed description.
If the Show all tools box is checked, the Setup
Manager tool group is displayed and available. If
unchecked, the Setup Manager tool group will
not be visible.
If the New button is pressed, a new Image
window is opened in the Image Container into
which the new image will be displayed. The next
acquired image is displayed in this image frame,
when it is the selected one. This function can be
used to avoid that an old unsaved image (acquired
by Live, Continuous or Snap) will be overwritten
by a new image.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
No
to keep the
000000-2071-464
Fig. 68 Info panel
Fig. 69 Save Active Acquisition Parameters
as panel
ZEISS
67