Zeiss LSM 880 Operating Manual page 58

ZEISS
Fig. 43 Delete Configuration panel
Fig. 44 Delete Configuration pop up menu
Fig. 45 Save current configuration as panel
Fig. 46 Assign Pop up menu
52
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
To delete a configuration press the Delete button
). This opens the Delete configuration panel
(
(Fig. 43).
Select the ocular
Configurations list by highlighting it or search for
it by typing its name in the Search field. The
Delete Configuration pop up menu will appear
(Fig. 44). Press Yes to delete the configuration, No
to keep the configuration or Cancel to close the
dialog.
To save a microscope configuration press the Save
button ( ). This opens the Save current ocular
configuration as panel (Fig. 45). Type in an
appropriate name in the Configuration field and
press Ok to save the microscope configuration in
the data base or press Cancel to abort the process.
The configuration that is saved is the one as
defined in the Microscope Control panel.
If you press the Assign button, the Assign pop up
menu will appear (Fig. 46). You can select the
button to which a configuration should be
assigned in the Button selection drop down menu
– up to 8 buttons are available. The configuration
that should be assigned to a button can be
selected from the Configuration selection drop
down menu. By pressing Assign the configuration
will be assigned to the button that will be
displayed right to the Assign button. The buttons
will carry the name of the selected configurations
and appear from left to right and top to down
according to their
configuration assigned to that button will be
automatically loaded by pressing that button. If
you want to delete a predefined button, select the
button (and its configuration), and press Delete.
The Microscope Control and Incubation tools
are available in the Locate tab (Fig. 41). By
pressing the expansion symbols in the bars the
Microscope Control
become available. The Microscope Control tool
permits configuring beam paths, which can be
saved and reloaded in the Configuration field.
Motorized functions
Microscope Control
reflector cube and illumination mode (transmitted
or reflected light) selection. The Incubation tool
allows setting the temperature, CO
and humidity.
LSM 880
configuration from
number. The ocular
and Incubation
controlled from
tool include objective,
level, O
2 2
10/2014 V_01
the
tools
the
level