Defining Channels And Tracks - Zeiss LSM 880 Operating Manual

ZEISS
Fig. 146 Channels tool – Appearance for the
LSM imaging mode
Fig. 147 Imaging Setup tool Tracks display–
track selection of track 1 and 2
updated from the Channel tool
116
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
5.2.9.1

Defining Channels and Tracks

The Channels tool lists all tracks in the Track
Selection display area that have been defined in
the Imaging Setup tool.
The Tracks name and the used Channels for that
track are indicated. Each track that is selected by
mouse click will be highlighted and be displayed in
the Track Configuration display area, which
allows for individual settings of each track
(Fig. 146).
Tracks are activated/deactivated for imaging with
the check box.
Changes in the selection of the tracks in the
Channels tool will automatically update the
selection in the Imaging Setup tool and vice
versa.
E.g. if Track 1 and Track 2 are selected in the
Channels tool, they will be selected in the
Imaging Setup tool as well (Fig. 147).
By clicking Expand All, all tracks will be selected
and their settings displayed.
Collapse All de-selects all tracks and hides their
settings.
You can either display one track or all tracks. There
is no possibility to display several out of all tracks.
LSM 880
10/2014 V_01