Zeiss LSM 880 Operating Manual page 162

ZEISS
The trigger can be selected from the Trigger In pull down menu. Up to 4 triggers are available. The
trigger has to be assigned in the firmware of the system. If no trigger is set the highlighted delay time will
be effective for the time series acquisition. Additionally it is possible to send a trigger signal out using the
Trigger Out pull down menu at the start of each delay time. Up to 4 Triggers are available. The trigger
output port has to be assigned via the firmware of the system.
Fig. 213 Interval Time
You can load a predefined timer configuration from the Interval Time field by pressing the Load button
(symbolized by the folder icon) (Fig. 213). All saved timer will be listed in the Load configuration...
panel (Fig. 214). Select the appropriate one by highlighting it in the Recent section, which lists the
recently used timer configurations or from the Configurations section, where all saved timer
configurations are displayed. To search for a timer configuration, type in its name or part of its name in
the Search field and only those timer configurations will be listed that contain the typed in string of
letters.
To delete a timer configuration press the Delete button (symbolized by the dust bin icon).
This opens the Delete configuration... window (Fig. 215).
Fig. 214 Load configuration... panel
156
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
Fig. 215 Delete configuration... panel
LSM 880
10/2014 V_01