Zeiss LSM 880 Operating Manual page 263

LSM 880
Please note, that x and y
scans are performed by
the stage regardless if the
Scanner button in the
Measurement tool group
is pressed or not. Z Scans
are performed
nosepiece.
Scans will be performed
relative to the
position. The
position will always be
displayed as
coordinates.
A maximum (or minimum)
in the resulting curve or
plot usually indicates a
region of interest.
• When the scan has been
finished, the vertical black line
(line plot) or the cross-lines
(frame plot) can be used to
re-position the focus. Just
drag the bar or cross-lines
with the left mouse button
held down to
position and release
mouse. By clicking the Ok
button the stage or nosepiece
will move to the new position
and the scan window closes.
The Abort button will be
inactivated for a
scan. You can press Ok or
Abort during the scan to
interrupt the scan. Ok will
close the window and the old
position is kept. Abort does
not close the window, so you
are still able to reposition.
Press Ok to leave the scan
window.
Note that the X, Y, XZ and
YZ
options
displayed, if the Show all
box is checked.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
by the
actual
actual
the 0
Fig. 344
the new
the
finished
Fig. 345
are only
000000-2071-464
Z Scan result window (line plot)
XY scan result window (line plot)
ZEISS
257