Zeiss LSM 880 Operating Manual page 470

ZEISS Center Screen Area / Image Containers - Display and Image Analysis
Fig. 658 Render Series window -
Position List mode
Remove permits the contents of the list to be deleted. Insert inserts a position above the highlighted list
entry.
The value for Total frames can be varied. A value of 20 produces a render series with 20 frames in total.
Interpolate lists variables that are interpolated during the Render Series.
Pressing the
rendering using the positions currently in the list. This serves as a help to quickly review the rendering
without actually starting the process (which might be time consuming in cases of long position lists.
Click on the Apply button calculates a spline along all the defined positions from the list and starts an
animation along this spline track in space.
464
CHAPTER 1 - SYSTEM OPERATION
button creates a short and low resolution (no interpolation!) preview of the
000000-2071-464
(3) Position List mode
In the Position List mode, the image is
reconstructed between any required number of
interim positions to be determined individually. Just
rotate the reconstructed image with the mouse or
do any other adjustment and add this as a
"position" in the position list. The module will
create a movie using those positions as a guideline.
It will interpolate all the parameters ticked in the
list.
The rotation angles for X, Y and Z and the zoom
can be determined directly in the image.
Every required interim position is included in the
list of the Render Series window with a click on
the Add button.
LSM 880
10/2014 V_01