Cut View - Zeiss LSM 880 Operating Manual

ZEISS Center Screen Area / Image Containers - Display and Image Analysis
Fig. 631 Cut View – control block
446
CHAPTER 1 - SYSTEM OPERATION
6.7
This function allows to display a user defined
section plane (= cut plane) of a Z-Stack. It
automatically improves the image of the section
plane by trilinear interpolation.
The settings of the Dimensions, Display, Player
and Graphics View Options control blocks apply.
Any changes done with this toolbar are effective
immediately. The content of the overlay plane is
temporarily hidden while the toolbar is displayed.
• By varying the parameters X, Y, Z, Pitch and
Yaw, you can position a section plane of any
orientation within the stack volume.
• Clicking the
restores the original position.
interactively use the interactive graphic in the cut
view control tab.
000000-2071-464

Cut View

In order to place the Cut View Plane
LSM 880
buttons
10/2014 V_01