Print - Zeiss LSM 880 Operating Manual

ZEISS
5.3.21.9

Print

Click on the Print tab to activate the Print Diagrams display mode (Fig. 387).
The Print Diagrams window shows an overview of the results presented in tables and / or graphs, and
relevant measuring parameters. This result overview can be printed directly on a connected printer.
In the Print Diagrams the following print functions can be selected by pressing the corresponding
button:
Print: Starts the print function.
Printer Setup: Opens the printer setup window to set the print parameters.
(1) Amount
Compressed: Selects the Compressed Report preview without diagrams.
Standard: Selects the Standard Report preview with correlation and fit curves.
Full: Selects the Full Report preview with all diagrams and tables.
(2) Data sets
All: Prints all measurements.
Selection: Prints all selected / highlighted measurements.
Current: Prints the last selected / highlighted measurement only.
To print a report, proceed as follows:
• Select the Compressed, Standard or Full button.
• Select the All, Selection or Current button.
• If required, change the printer settings using the Printer Setup button.
• Click on Print to start the print procedure.
290
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
LSM 880
10/2014 V_01