Zeiss LSM 880 Operating Manual page 123

LSM 880
The color of a track can be set or changed
selecting a LUT from the Look Up Table (LUT)
drop down menu (Fig. 148).
The scroll bar allows access to all predefined colors.
The color is updated for the channels in the
Imaging Setup tool of the corresponging track.
By pressing the upwards pointing open arrow,
the highlighted track will move one position up in
the displayed track array (Fig. 149).
Likewise, by pressing the downwards pointing
open arrow, it will move one position down. The
arrows are only active, if an upward or download
movement is possible.
The sequence is updated in the Imaging Setup tool
accordingly.
You can add up to 4 tracks by pressing the +
button. You can delete tracks by highlighting them
and pressing the dust bin button. The number of
tracks is updated in the Imaging Setup tool
accordingly.
You can load a predefined track configuration as a
profile at the position of the highlighted track from
the Track Configuration field (only available in
the Show all mode) by pressing the Load button
(symbolized by the folder icon) (Fig. 150).
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
Fig. 148 Track LUT drop down menu
Fig. 149 Track selection display – Track 2
moved to the top, no further
upwards movement possible
Fig. 150 Track configuration
ZEISS
117