Zeiss LSM 880 Operating Manual page 125

LSM 880
The Info window pops up (Fig. 153).
Press Yes to delete the configuration, No to keep
the configuration.
To save a configuration press the Save button
(symbolized by the disc icon).
This opens the Save current Track configuration
as panel (Fig. 154).
Type in an appropriate name in the Configuration
field and press Ok to save the configuration in the
data base or press Cancel to abort the process.
The name of the track can only be changed when
saving the track (Fig. 155).
If a highlighted track is saved with a certain name
or a predefined track with a name is loaded into a
highlighted track, the new name will appear in the
Tracks designation box automatically.
Track designation in the Imaging Setup tool will
automatically be updated (Fig. 156).
The total set of parameters for one or multiple
tracks can be stored as an acquisition configuration
using the save option in the Experiment
Manager field of the Acquisition panel.
Using multiple tracks is the preferred method to
clearly separate weakly overlapping emission
signals.
Display
The panel
functions. Auto copy from last acquired applies
the display parameters
contrast) to the following images acquired. Range
indicator overwrites the LUT set with the Imaging
Setup tool and shows all subsequently acquired
images with the LUT Range indicator.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
(Fig. 157) provides
(brightness, gamma,
000000-2071-464
Fig. 153 Delete information window
Fig. 154 Save Current Track Configuration as
window
Fig. 155 Track selection display – Tracks
renamed
Fig. 156 Imaging Setup tool Tracks display –
Tracks renamed updated from the
Channels tool
two
Fig. 157 Display panel
ZEISS
119