Method Tool - Zeiss LSM 880 Operating Manual

ZEISS
Fig. 334 Save Method panel
(1) Storing a method
The Store button (floppy disc symbol) will allow you to save all settings (Light Path, Acquisition,
Correlator) into a method.
• Click on the Store to open the Save Method panel (Fig. 334). Click again to close the panel.
• You can save the method by pressing the Ok button. If the method name exists already, the system
will prompt you to confirm overwriting the old method. Press Yes to overwrite, No to keep the old
method settings. If the system settings deviating from default expectations, it will give a warning. For
example, if no pinhole alignment was done or if a dual color experiment was set up with one channel
or one laser, a corresponding warning will be displayed. Press Yes for continuing anyway, No for
returning to the method without saving. If you press Cancel, the Save Method windows will close
without saving the method.
• You can enter a new method name or replace the old one by typing into the Name display window
You can enter a category name or replace an old one by typing into Category display box.
• You can give a comment or replace an old one by typing it into the Comment display box.
250
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
5.3.14

Method Tool

The Method tool allows to store (floppy disc
button), load (open file button) and to delete
(cross button) methods.
LSM 880
10/2014 V_01