Sample Carrier - Zeiss LSM 880 Operating Manual

LSM 880
5.2.20.2

Sample Carrier

Press the Sample Carrier button to obtain the
Sample Carrier control panel (Fig. 236).
The last used sample carrier will be displayed in the
Sample Carrier display area. If no sample carrier is
defined, the area remains empty.
You can define the sample carrier by clicking on
Properties of the Carrier definition field.
By using the Columns and Rows Number input
boxes, you can define the numbers of columns and
rows of the carrier. In the Columns and Rows
Distance (mm) input boxes, you can define the
distance between the single wells of the carrier in
horizontal and vertical direction, respectively
(Fig. 237).
You can load a predefined carrier configuration
from the Carrier definition field by pressing the
Load button (symbolized by the
(Fig. 238).
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
icon)
000000-2071-464
Fig. 236 Sample Carrier control panel
Fig. 237 Properties Pop up window
Fig. 238 Carrier definition field
ZEISS
163