Left Tool Area - Zeiss LSM 880 Operating Manual

LSM 880
4.8

Left Tool Area

Main Tool tabs
Switches between the Locate, Acquisition,
Processing and Maintain main tools to
operate the included tool
Action buttons
Action buttons are only available for the
Acquisition Main tool to control the image
acquisition process.
Tool groups
Groups special tools, e.g. Setup Manager
or Acquisition Parameter.
Setup Manager
The tools of this tool group (Laser and Setup
Imager) are only visible if the check box
Show all Tools is checked. Those tools are
necessary if the system should be operated
in full manual mode. The use of the
automated functions of ZEN like smart setup
includes the functions of those tools.
The tools Laser and Setup Imager
are not displayed by default in the
software. They can be shown if the
check box Show all Tools is
checked.
Acquisition Parameter
Tools continuously needed for all acquisition
procedures.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Introduction to the Software Application Layout
000000-2071-464
ig. 30 Left tool area
F
ig. 31 Expand slider with arrow button pointing
F
left to collapse and right to expand
ZEISS
41