Correlation Options - Zeiss LSM 880 Operating Manual

LSM 880
5.3.4.2

Correlation Options

In correlation you can assemble a model with
predefined terms.
• Press the Correlation tab to activate the
options for assembling a correlation model
(Fig. 275). Press any other tab to leave the
panel.
• Normally the last defined model will be
displayed in the Equation Select window.
Selected terms will be displayed in blue and the
assembled equation will be displayed in the
G(t)=1 display area. The name of the model will
be displayed in the Model display box.
• You can load a pre-defined model from the
Model drop down menu. Its name will than be
displayed in the Model display box (Fig. 275).
• You can alter the model or leave it unaltered
and rename it by typing the new name into the
Model display box.
• You can save the model by pressing the Save
button (floppy disc icon). If the name is pre-
existing you will be prompted to confirm
overwriting the old method. Press Yes to
acknowledge, No to keep the old method.
• You can delete a method from the list by
highlighting the method and pressing the
Delete button (dustbin icon).
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
Fig. 275 Define Model panel – Correlation
ZEISS
195