Acquisition Mode Functions For Lsm - Zeiss LSM 880 Operating Manual

ZEISS
5.2.8.7

Acquisition Mode Functions for LSM

The parameters for image acquisition are set using the tool Acquisition Mode.
The following scan modes, which can be selected from the drop down menu, are available:
Frame
− scanning of an XY frame (Frame, Frame + Time Series)
− scanning of XY frames with different Z-values (Frame + Z-Stack, Frame + Z-Stack + Time Series)
− scanning of XY frames in defined ROIs (Frame + ROI + Time Series)
− scanning of XY frames with different Z-values in defined ROIs (Frame + Z-Stack + ROI + Time Series)
Line
− scanning of a line in the XY-plane (Line, Line + Time Series)
− scanning of a line with different Z-values (Line + Z-Stack, Line + Z-Stack + Time Series)
Spot
− scanning of a spot (Spot + Time Series)
The availability of the modes is also dependent on the imaging device used e.g. LSM 710 or camera.
Depending on the selected scan mode the additional parameters for image acquisition will change.
106
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
LSM 880
10/2014 V_01