Start - Zeiss LSM 880 Operating Manual

LSM 880
The Info window pops up (Fig. 222).
Press Yes to delete the configuration, No to keep
the configuration.
To save a marker configuration press the Save
button (symbolized by the disc icon).
This opens the
configuration as panel (Fig. 223).
Type in an appropriate name in the Configuration
field and press Ok to save the configuration in the
data base or press Cancel to abort the process.
When the image series is stored, all the markers,
including the time indication and the comments,
are stored along with the image contents.
The markers visible in the image series have different colors with the following meaning:
− red:
manually set marker with time indication and comments
− blue:
automatically set marker with change of delay
− green: automatically set marker at the beginning and at the end of a bleaching procedure
5.2.19.3

Start

Expand the Start field by clicking the triangle
(Fig. 224).
In the Mode drop down menu (Fig. 225) you can
select the way the acquisition is triggered. You
have the choice between Manual, Trigger and
Time.
If Manual is selected the acquisition of a time
series is started using the Start Experiment action
button.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
Save current marker
000000-2071-464
Fig. 222 Delete information window
Fig. 223 Save current marker
configuration as window
Fig. 224 Start field
Fig. 225 Start Mode drop down menu
ZEISS
159