Zeiss LSM 880 Operating Manual page 484

ZEISS Center Screen Area / Image Containers - Display and Image Analysis
Control block tools
The Profile toolbar contains the following tools:
Select button: Activates the mouse button for selection, resizing or movement of the
profile line in the Image Display window.
Resize: Click on handle and hold down the mouse button, move the handle, release
mouse button.
Movement: Click on line and hold down the mouse button, move the entire line, release
mouse button.
Line with arrow button: (open arrow): Activates the straight profile drawing mode.
Click into the image and hold the mouse button, drag a line in any direction and release
the mouse button to end the procedure.
Open polyline arrow button: Activates the open polyline drawing mode.
The first click into the image sets the starting point, each additional click adds a further
line, right mouse click ends the procedure.
Line button: This button allows you to determine the line thickness of the profile line. It
has no influence on the way the intensity profile is generated.
Show Table button: The profile diagram is displayed as a table at the bottom of the
Image Display window.
Tables can always be saved or copied to the clipboard by right-mouse clicking on the table
display!
478
CHAPTER 1 - SYSTEM OPERATION
000000-2071-464
LSM 880
10/2014 V_01