LSM 880
Autofocus Strategies use the center position of a Z-Stack as the reference position. For a given
−
Z-Stack go to the center position and if necessary, click Center within the Center tab of the Z-Stack
tool once to confirm the reference.
All imaging modes defined in the Imaging Setup Tool (i.e. WF, LSM) can be assigned to different
−
Blocks and used in mixed mode experiments.
FCS measurments cannot be performed using Experiment Designer
−
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
ZEISS
83