Maintain Tab - Zeiss LSM 880 Operating Manual

LSM 880
5.5

Maintain Tab

Press the Maintain tab to have access to the Maintain tool group area (Fig. 552). The maintain tool
group allow to adjust hardware settings.
Fig. 552
The Maintain area is divided into the Maintain and Options field.
The tool tabs in the Maintain field allow the calibration and adjustment of hardware settings. The
following options are available:
− Adjust Pinhole and Collimator (for LSM imaging mode),
− Define Objectives,
− Define Filters for external detector modules (NDD, BiG)
− Set options for Airyscan
The tool tabs in the Options field allow customize hardware and software settings. The following
options are avialable:
− System Options: Options for LSM and ELYRA
− FCS Options: Options for FCS data acquisition
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
Maintain tab – tool group area
000000-2071-464
ZEISS
395