Zeiss LSM 880 Operating Manual page 227

LSM 880
Stretched exponential
You can select between bunching and anti-
bunching terms by pressing the Bunching or
Antibunching buttons, respectively (Fig. 288).
You can select between 1 (mono exponential) or 2
(double exponential) stretched exponential terms
by pressing the Components 1 or 2 buttons. The
active option will be displayed in blue
You can select between normalized and non-
normalized terms by selecting / deselecting the
Normalized check box.
You can select between
independent stretched exponentials by choosing
from the Components drop down menu. This
becomes only available, if two components are
active.
Note, the frequencies and stretch factors are
no fit parameters and must be defined in the
Frequencies k
1
κ κ
factors and
1
a value or press the 1 button for the default
setting.
The description box will give information on the
stretched exponential terms.
For two components, only the formula for
dependent processes is presently available.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
dependent
and k as well as the Stretch
2
display boxes. Either enter
2
000000-2071-464
and
Fig. 288 Stretched exponential Settings
panel
ZEISS
221