Microscope Control Tool For Axio Imager.z2 - Zeiss LSM 880 Operating Manual

ZEISS
5.1.2

Microscope Control Tool for Axio Imager.Z2

• Click on Locate tab in the Left tool area. Click Online if needed.
• The currently set light path of the microscope is displayed.
• Depending on the level of motorization, the following parts can be controlled:
Reflected Light HBO Lamp
Shutter Reflected Light
Tube Lens
Reflector
Objective
Condenser
Field Stop
Filter
Transmitted Light Lamp
Shutter Transmitted Light
60
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
This function controls the reflected light illumination source, e. g. X-
Cite 120. An additional dialog opens which allows to open and close the
lamp internal shutter and to attenuate the light intensity of the lamp via
slider or input box.
This turns the rear port mirror to guide the light to the specimen or to
block it from the specimen.
This function allows switching between available tube lenses. The
appropriate lens is automatically set when switching between Locate and
Acquisition in the Main toolbar.
Push and click reflector cube can be selected via graphical pop-up menu.
Objectives can be selected via graphical pop-up menu.
Numerical aperture of the condenser is set via input box or slider. Turret
position (filter) selected from graphical pop-up menu (only for motorized
condensers).
Opening of luminous-field diaphragm (transmitted light) can be set via
input box or slider.
Transmission values for attenuation filter (transmitted) are set via input
box or slider for the front or rear filter wheel in accordance with the
available filter steps.
Transmitted light is switched on / off via ON button in the Transmitted
Light frame, setting of light intensity can be varied via input box or slider.
3200 K color temperature for photo documentation can be switched on
via 3200 K button in the Transmitted Light frame.
This function opens or closes the internal shutter for transmitted light.
000000-2071-464
LSM 880
10/2014 V_01