Processing - Particle Tracking - Zeiss LSM 880 Operating Manual

LSM 880
5.4.15 Processing – Particle Tracking
standard  optional
Tool was exclusively developed for tracking molecules or particles having a dot-like
appearance in the image data.
The Processing Particle Tracking tool allows the
identification of single molecules and follows their
movement. Trajectories will be displayed.
In the image you have than the possibility in the
Particle Tracking tab to calculate the mean square
displacement and diffusion coefficients of the single
molecules.
Highlight the Particle Tracking field to have access
to the Particle Tracking tool (Fig. 464).
Activate the image you want to process in the image
container and press the Select button to load the
image. Then expand the Method Parameters tool
window to have access to the Particle Tracking tools
(Fig. 465).
You can set different parameters to define the
molecules and the calculation of the trajectories:
− Peak intensity to noise. Sets the signal over
noise threshold according to I-M > SS x PI (I =
intensity of particle; M = mean intensity of
image frame; SD = standard deviation of mage
frame; PI = peak intensity to noise).
− Cut off. Sets a filter to suppress molecules that
deviate from the ideal Gauss shape, for example
it there is a background structure.
− Feature mask size [pixel]. Determines the
mask used to cut out the particle.
− Link range [frames]. Sets the lower limit in
frames over which the particle has to be
detected.
− Displacement [pixel]. Sets the upper limit of
distance the particle is lowed to have from one
frame to the next.
− Trajectory Length [pixel]. Sets the lower limit
in the trajectory length a particle must have
over the observed time period in order to be
considered a particle.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
Licensing
000000-2071-464
Instrument
LSM  ELYRA
Fig. 464 Processing – Particle Tracking
tool selected
Fig. 465 Processing – Particle Tracking
tool field
Lightsheet Z.1
ZEISS
339