Zeiss LSM 880 Operating Manual page 459

LSM 880 Center Screen Area / Image Containers - Display and Image Analysis
The following additional buttons are available in the Any View shadow projection mode:
• After activation of the Frame button
reconstructed image.
Depending on the used mode and hardware configuration, it can take several seconds until the
3D reconstruction is refreshed on the monitor after reorientation.
• A click on the Coordinate System button
Display window, where the X axis is displayed in red color, the Y axis in blue and the Z axis in green.
• A click on the Scale button
• A click on the Home button
A click on the Any View button displays the 3D reconstruction image in a shadow projection where the
viewing point can be defined. In addition to the zoom setting, the image can be rotated around the three
orthogonal axes via the relevant setting wheels.
However, the 3D orientation can also be set directly in the Image Display window by clicking, holding
and dragging the 3D reconstructed image with the mouse.
• A click on the Animation button
dragging in the Image Display window and rotates continuously. Any new push with pressed left
mouse button changes the rotation direction and speed of the animation.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
(below the image), a bounding box is drawn around the 3D
displays a colored coordinate system in the Image
display an X-, Y- and Z-scale in the Image Display window.
resets the display parameters to the default values.
activates the animation mode. The object can be pushed by
000000-2071-464
ZEISS
453