ZEISS
Fig. 95
Imaging Setup tool
Fig. 96
Imaging Setup tool – imaging mode
selection menu
84
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
5.2.7
Setup Manager – Imaging Setup
The Imaging Setup tool (only available when the
Show all tools check-box is ticked) allows
new / existing beam path configurations to be
created / edited and saved for the different
imaging modes.
•
Click on the Imaging Setup tool or close the
tool window (Fig. 95).
The Imaging Setuptool is divided in the
•
Imaging mode selection
•
Beam path configuration
•
Ratio Imaging panel
5.2.7.1
Imaging Mode and Track Definition
Different imaging modes can be selected by
activating the respective tab (Fig. 96).
The following imaging modes are available:
− Channel
− Lambda Mode
− Online Fingerprinting
LSM 880
10/2014 V_01