Zeiss LSM 880 Operating Manual page 487

LSM 880 Center Screen Area / Image Containers - Display and Image Analysis
Graphical elements list
List Columns
Eye symbol
Lock symbol
Type
ID
M
Name
Correlating a live image and a snapped image
The snapped image and the regions of interest drawn in the image can be relocated after the stage has
been moved.
− Open a second container in the view tab
− Click on the Continuous button to start continuous scanning.
− Load the previously acquired image and click either on Center in the Find tool bar to center the live
image or click on the ROI/POI within the Find tool bar to center the activated ROI or POI in the live
image.
Defined regions of interest and points of interest can only be relocated within one imaging
session. In case the software was restarted, the positions of the image and the defined regions
and points are no longer valid.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Description
Shows or hides the ROI / POI in the image.
Locks a ROI / POI to prevent changes.
Displays the icon for the tool type (ROI/POI).
Displays the ID for the graphic element. To do this, activate the
checkbox at the corresponding list entry.
Displays measurement data for a graphic element. To do this, activate
the checkbox at the corresponding list entry.
Displays the name of the graphic element. To change the name,
double-click in the Name field. Then enter the text of your choice.
000000-2071-464
ZEISS
481