Start And End Of A Measurement - Zeiss LSM 880 Operating Manual

LSM 880
5.3.21.1

Start and End of a Measurement

Fig. 351 FCS Correlation window during data acquisition
After setting the parameters the measurement can be run.
• Click on the Snap or Start Experiment action button to start the measurement and data analysis
process. If Snap was chosen, exactly one measurement at the first Carrier or highlighted LSM Image
(Fig. 351) position will be performed. If Start was selected, measurements will be performed on all
selected positions in a sequence.
Status lines at the bottom of the data evaluation window and in the Open Image display area
show the progress of a current measuring procedure online. For non saved modified data a
warning sign (orange triangle) will be displayed in Open Images (Fig. 358).
• Click on the Stop button to end the measurement. Only complete measurements will be available for
storage; the interrupted measurement will be lost.
• Save the data in the File menu.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
ZEISS
263