Processing - Average - Zeiss LSM 880 Operating Manual

ZEISS
5.4.6 Processing – Average
 standard
Tool accepts all types of image data recorded with the listed instruments. See full
description of tool for details.
Fig. 402 Processing – Average
An average output image will be calculated according to the settings and the result presented in the
Preview window.
The size of the resulting image in X, Y, Z, and T can be viewed in the Size of result image display.
If the Apply button is pressed, the averaged image will be opened as a new image in the container.
304
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
Licensing
optional
000000-2071-464
Instrument
 LSM  ELYRA
The Average processing function will calculate an
image that can be averaged in pixel and time.
• Activate Average in the Processing tool.
The Average menu will appear. The Average
processing function will calculate an average
image.
• Click on the triangle buttons to show or hide
the Method Parameters and Preview panels
(Fig. 402) for the function.
• To select an image, click on the image in the
container and press the Select button. This will
be your Input image.
• Select how many pixels you want to bin in x-
direction, y-direction, and time points by setting
the respective values in the X Average Pixels,
Y Average Pixels, Z Average Pixels and Time
Average Pixels input boxes, which can be
opened by clicking on the arrows.
Note that Z-Average Pixels and Time
Average Pixels are only available for Z-
Stacks and time series. You can either enter
a value, or use the sliders, or arrows of the
input boxes.
If a moving average for Time should be
performed, the respective Moving Average
box must
consecutive averages comprised of the
specified number of frames in Average
Pixels will be computed.
 Lightsheet Z.1
be checked. In
10/2014 V_01
LSM 880
this case,