Marker - Zeiss LSM 880 Operating Manual

LSM 880
Select the timer
Configurations list by highlighting it or search for
it by typing its name in the Search field. The Info
window pops up (Fig. 216).
Press Yes to delete the configuration, No to keep
the configuration.
To save a configuration press the Save button
(symbolized by the disc icon). This opens the Save
current timer configuration as panel (Fig. 217).
Type in an appropriate name in the Configuration
field and press Ok to save the configuration in the
data base or press Cancel to abort the process.
The delay time can be changed while scanning.
5.2.19.2

Marker

Expand the Marker field by clicking the triangle
(Fig. 218). The Marker functionality provides the
possibility to indicate the start or end of an
external process in the data of the image series by
connecting this external process to the selected
Trigger In for that Marker. Up to 4 different
triggers can be selected from the Trigger In pull
down menu. You can edit a description of that
marker in the Description box of the Marker,
which will be visible in the image data using the
Mean ROI functionality or the image gallery display
mode. A Trigger Out signal can be set with each
defined marker. Up to 4 different triggers can be
selected from the pull down menu. By clicking Set
a marker is set manually at any time during
scanning. A maximum of seven different markers
can be defined using the + button. The – button
deletes the currently highlighted marker.
Fig. 219 Marker
You can load a predefined timer configuration from the Marker field by pressing the Load button
(symbolized by the folder icon) (Fig. 219).
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
configuration from
000000-2071-464
the
Fig. 216 Delete information window
Fig. 217 Save current timer configuration
as window
Fig. 218 Time Series tool – Marker
ZEISS
157