LSM 880
3.2.2
Switching System Power Off
After having exited the ZEN software, you may turn off the whole system with the following Shutdown
procedure.
• Make sure you have saved all your image data.
• Switch of all the lasers which might still be running.
• Close the ZEN software window. This terminates the ZEN software.
• Shut down WINDOWS.
• About 20 seconds after WINDOWS is shut down your computer turns off.
Please bear in mind that a cooling phase of at least 5 minutes is required between switching off
of the Argon laser and switching off of the entire system via the power remote switch or the
Power Supply switch.
5 minutes after computer shutdown set the power remote switches System/PC and
Components or the Main switch on the System Electronic Rack to position OFF.
This puts your LSM 880 including the computer off power.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Startup and Shutdown of the System
000000-2071-464
ZEISS
25