Zeiss LSM 880 Operating Manual page 524

ZEISS Center Screen Area / Image Containers - Display and Image Analysis
In the Show all mode you have further the option to display the Std.Dev. (standard deviation) maps of
both parameter maps as well as the Χ
maps and Show X2 map boxes.
In Map definition you can define the region size in an m x n format. Please note, if you don't choose a
size as an integer part of the intensity image, some rest areas to the right and bottom of the image will
not be taken into account. Region sizes can be put into the Region sizes in X / Y in Pixels input boxes
by using the slider, arrows or typing. Default values in an m x m format can be obtained by pressing the
64, 96 or 128 buttons. The step size with which the region will be shifted from data point to data point
can be put in the Shift region in X / Y in Pixels input boxes by using the slider, arrows or typing. The
default value of a shift size half the region size can be obtained by pressing the 50% region size button.
In Filter maps different Filter modes can be selected to sort out outlier values. Extreme outliers will
affect the scaling of the map so that interesting values can be hidden. By checking the Filter all maps
box, chosen filters will be applied for all maps. If not selected only the map chosen in the Map type pull
down menu will be filtered. You can choose between Informative Pixels, ratio and mean / variance filter
by checking the respective Informative Pixels, Ratio (Std.Dev./Value) and Mean value variance
boxes. Thresholds can be set in each case via the input boxes by typing or using the arrows. Note that
filters can be combined.
Fig. 725 Export mode pull down menu
518
CHAPTER 1 - SYSTEM OPERATION
2
(Chi square) map by checking the Show standard deviation
In Export maps one can select which maps should
be exported as an .lsm image by selecting between
the Current map, that is only the map selected in
the Map-type pull down menu, All parameter
maps, that are the Number particles and
Diffusion coeffic. (µm x µm /s) maps, and All
maps, that are the parameter maps, Std.Dev.
maps and X
000000-2071-464
2
maps (Fig. 725).
LSM 880
10/2014 V_01