LSM 880
3.2
Shutdown Procedure
Never shut down the computer by its main switch while the ZEN software is still active, or else
you will lose the currently set operating parameters and the images just scanned.
In the Maintain tab / System Options dialog window, activate Laser off on Exit in the
Shutdown tab (section Options – System Options). The Argon laser and Ti:Sa lasers will
automatically be switched off when you exit the LSM program.
3.2.1
Exiting ZEN Software
Fig. 13
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Startup and Shutdown of the System
Exit in the File menu
000000-2071-464
ZEISS
23