Hardware - Zeiss LSM 880 Operating Manual

ZEISS
1.2

Hardware

Depending on whether the following hardware components are available or not, the content of the
screens may differ:
− Piezo objective focusing device / Z-Piezo stage
− X-Y scanning stage (different types available)
− Axio Observer.Z1 / Axio Imager.Z2 / Axio Examiner.Z1
− Depending on the configuration the scan head equipment may differ in filters, beam splitters and
the number of photomultiplier
− Transmitted-light PMT
− Non Descanned Detectors (NDD)
If your configuration does not include the Piezo objective focusing device or the Z-Piezo stage, the
following functions are not available:
− Use Piezo in the Z Stack tool in the left tool area
If your configuration does not include an X-Y scanning stage, the following functions are not available:
− Stage tool, Positions tool and Tile Scan tool in the left tool area
Depending on the used microscope stand: Axio Imager.Z2, Axio Imager.M2, Axio Examiner or
Axio Observer.Z1, the following dialogue and available functions may differ:
− Context and accessibility of the Locate tab.
If your configuration does not include BiG.2, Airyscan, transmitted light PMT and/or NDD, the following
functions may differ:
− Context and accessibility of the Imaging Setup tool
If your configuration does not include an AxioCam, the following functions are not available:
− WF in the Imaging Setup tool, Channels tool
4
CHAPTER 4 - ANNEX
Software and Hardware Options
000000-2071-464
LSM 880
10/2014 V_01