Zeiss LSM 880 Operating Manual page 291

LSM 880
The context menu of the Fit deviation diagram
(Fig. 380) can be used to reset the zoom to its
original value, copy the data, and adjust the
display.
• Click on the diagram with the right mouse
button. The Fit deviation context menu opens.
• Click on the line Reset Diagram Zoom with
the left mouse button to reset the zoom to its
original value.
• Select the line Scaling to open the Diagram
scaling window (Fig. 381). Enter the required
percentage value (from 1 to 100) for the scaling
and click on OK to rescale, Cancel to keep the
old value. The scaling of the G(t) axis will be
adjusted.
• Select the line Copy data to clipboard with a
click of the mouse if you want to insert the data
directly into other WINDOWS programs via the
clipboard. The Paste function permits direct
insertion of these data into the required
program.
• Select Write to file to store the data in an
external ASCII file (.txt).
(2) Fit table
The Fit Table displays the values of the fitted parameters and will be updated after pressing the Fit tab.
All the Fit table functions in the FCS Fit mode are identical to those in the Fit application.
Measuring rows in the Result table can be activated / deactivated by checking / unchecking the
corresponding check boxes. Deactivation of these check boxes will not exclude the relevant rows from all
subsequent evaluation procedures, but only from the average. Average curves are updated in respect to
the rows taken into consideration.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
Fig. 380 Context menu of the Fit Deviation
diagram
Fig. 381 Scaling menu
ZEISS
285