View; Dimensions - Zeiss LSM 880 Operating Manual

ZEISS Center Screen Area / Image Containers - Display and Image Analysis
6.2 2D View
This function allows to
− display a single image in frame mode,
− display multiple channel images in superimposed mode.
The following View Option control blocks apply to this View Type:
Dimensions, Display, Player and Graphics.
In the 2D view, only the general View Option control blocks are displayed. These view option blocks are
also available in those other view options in which the functions are applicable.
The general view option control blocks are only described in this section.
Fig. 598 View Options control block -

Dimensions

Fig. 599 View Options control block –
Dimensions for SIM images
(1) Dimensions – Zoom
In the Dimensions View Options control block, there are the Zoom and Tools function lines related to
changing the zoom factor of a displayed image.
Any changes on these elements affect the displayed image immediately. The zoom function can be
performed online.
424
CHAPTER 1 - SYSTEM OPERATION
6.2.1
The Dimensions View Options control block
holds the tools to modify the image display with
respect to the (multiple) dimensions of the image
data set.
The sections (slices) in the dimensions can be
scrolled
inFig. 598) and also directly addressed with setting
numbers in the spin-boxes next to the sliders.
For SIM raw images you will have in addition
available sliders for the Phases and Rotations of the
grid (Fig. 599).
The small
spin-boxes (Z-Position and Time) starts and stops
an animation in the respective dimension. This
basic animation cannot be customized. For all
other player-functionality refer to the Player View
Block.
000000-2071-464
Dimensions
with sliders (Z-Position
button on the right hand side of the
LSM 880
and Time
10/2014 V_01