Zeiss LSM 880 Operating Manual page 600

CHAPTER 3 - ADDITIONAL SOFTWARE TOOLS
ZEISS ZEN Configuration Tool LSM 880
• Within the appearing window (Fig. 12) choose the tabs Scan Head, LSM 880, Filter.
Fig. 12 Configuration Tool with tabs seleceted for access to filter settings
• Do not change any existing filters or filters from filterwheels inside the scan head. This leads to
malfunctions of the system!
• From the drop down list next to Filterwheel: choose the device you want to define a new filter for.
This is either "Emissionfilters for DC-Out detectors" (BiG.2 on DCout port), "Emissionfilters for reflection
detectors cascade" (any detector used on NDD port for reflection) or "Emissionfilters for transmission
detectors cascade" (any detector used on NDD port for transmission) (Fig. 13).
Fig. 13 Options of external detectors for which a new filter might be defined
8 000000-2071-464 10/2014 V_01