Access To Rics; Control Of View Functionalities - Zeiss LSM 880 Operating Manual

LSM 880 Center Screen Area / Image Containers - Display and Image Analysis
6.19.1

Access to RICS

If you have taken an image or an image series or have opened an old image or image stack, a click on the
RICS tab of the View tab list will make the RICS functionality available.
The right column of the Image window will display the Fit table, the middle image the original intensity
image and the left one the computed correlation image using a default LUT (look up table) and a scale
bar for the correlation (Fig. 704). Below, the result table is displayed.
Fig. 704 RICS window with RICS register active
6.19.2

Control of View Functionalities

All required settings and manipulation for the RICS analysis can be called up with the View tabs. They
divide into View for image manipulation, RICS for correlation analysis and 2.5D for display
functionalities. The View and 2.5D options are described at respective sites of the manual dealing with
image display. Here RICS functionalities are detailed.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
000000-2071-464
ZEISS
509