Loading Stored Data Files - Zeiss LSM 880 Operating Manual

LSM 880
5.3.21.2

Loading Stored Data Files

To load stored data files you can use the File menu
from the main toolbar (Fig. 356).
• Go to File and than choose Open. This will
open the Open dialog box for the selection of
drives, directories and subdirectories in which
data files have been stored (Fig. 357).
• If you want to load a data file from another
folder (drive / directory), click on the arrow
button to the right of the Look in box. This
opens a drop-down list box in which you can
select from all available folders.
• Select the appropriate data file(s) via mouse
click. Choose the extension you need and select
the file you want to open. Data formats that
will be recognized in are .fcs, and .raw. Raw
and FCS data files (.raw/.fcs) will load together
in a diagram if selected together. You can also
open Images (.lsm/.czi) which are affiliated with
the measurement.
• Alternatively you can select recent .fcs files
directly by choosing the corresponding file from
the file list of the Open menu.
The status bar in the Open Images area displays
the time progress for loading an image (Fig. 358).
• You can also drag a file from the Windows
Explorer and drop it into the container in order
to open the file.
• This will open the data files or images in new
Image FCS Diagrams
respectively, in a new container. Note that the
FCS and image will be loaded into different
diagrams.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
Image,
or new
000000-2071-464
Fig. 356 File menu
Fig. 357 Open dialog
Fig. 358 Open Images with measurement in
progress
ZEISS
267