Zeiss LSM 880 Operating Manual page 226

ZEISS
Fig. 287 Flow Settings panel
220
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
Flow
You can determine, if you want to fit to the
diffusion time or to the velocity directly by un-
ticking or ticking the Velocity check box
(Fig. 287). In the latter case you have to provide
the radial dimension of the confocal volume in the
ω
selection box. Type in the number or use the
r
arrow keys.
The description box gives you information on the
flow terms. Note, that the system automatically
toggles between the pure flow and flow in
combination with translational diffusion in cases
where the Translation term is deactivated or
activated, respectively.
LSM 880
10/2014 V_01