Zeiss LSM 880 Operating Manual page 186

ZEISS
The icons are inactive, as the EFs are part of the filter cube together with the SBS filter, which has to be
replaced manually. The filter are indicated to SW within the Filters Tool window (Maintain tab). Note, that
if the filter is exchanged manually and the database is not updated, the old filter names will stay.
To adjust the pinhole for this beam path press Adjust pinhole... and proced as described below.
Selection of channels
You can select channels by activating the Channel check boxes:
− AC GaAsP1 and AC GaAsP2 are physical channels for auto-correlation
− CC GaAsP2 → GaAsP 1 and CC GaAsP → GaAsP are software channels for cross-correlation,
whereby AC GaAsP 2 is shifted versus AC GaAsP and vice versa
You can enter a special comment (for example the used dye or a memorable name) into the editing field
next to the activating checkboxes.
180
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
LSM 880
10/2014 V_01