Microscope Control Tool For Axio Observer.z1 - Zeiss LSM 880 Operating Manual

LSM 880
These microscope functions can also be operated directly on the microscope stand via
assigned buttons or through the touch screen, if available. In that case, any changes are
recorded by the software and displayed in the relevant windows / panels.
For left side port access, the reflector has to be in a None position.
If the reflected light lamp is equipped with a software controlled shutter, the Shutter On/Off button in
the Fluorescence field should be in the On position in order to open the shutter. In Shutter Off mode,
the shutter is closed and will block the light.
5.1.1 Microscope Control Tool for Axio
Observer.Z1
To have access to the microscope functions to
define a configuration, you have to expand the
Microscope Control
expansion symbol in the Microscope Control tool
tab (Fig. 47).
The Microscope Control panel contains the
following functions:
HAL On/Off button for transmitted light: If the
button is pressed, the control panel appears
(Fig. 48).
If you press the On button it will be highlighted
and the Halogen lamp will be switched on
(symbolized by the halo in the lamp symbol).
In parallel the shutter for transmitted light
automatically opens (On position in the Light
control field and Open position in the Ocular
panel). The light intensity of the HAL lamp can be
varied via the input box or slider.
The light path will be highlighted by color in the
diagram. Press the On button again to shut down
the light. The button will go to the Off position
and the shutter closes automatically.
The color temperature for photo documentation
can be switched on via the 3200 K button.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
tool by pressing
000000-2071-464
the
Fig. 47 Microscope Control tool
Fig. 48 Microscope Control tool – HAL lamp
control
ZEISS
53