Remove Objective; Show/Edit Objective - Zeiss LSM 880 Operating Manual

LSM 880
5.5.2.4

Remove Objective

This function allows removing objectives from the
User Defined Objective database (Fig. 567).
Expand the User Defined Objective directory and
highlight the objective you want to delete.
Press the Remove Objective button in order to
delete the selected objective. Note that the Remove
Objective button only becomes available, if an
objective from the user Defined Objectives directory
was chosen. You will be prompted to confirm to
delete the objective in the Delete Objective pop up
window (Fig. 568). Press Yes to delete the objective
from, No to keep it in the database or Cancel to
abort the process.
5.5.2.5

Show/Edit Objective

This function allows viewing the parameters of an
objective from all objective directories. Editing the
parameters is only possible for the User Defined
Objective database (Fig. 569).
Expand the Favorite Objective, User Defined
Objective or Potential Objective directory and
highlight the objective you want to view. This will
open the View tab.
In case of an objective listed in User Defined
Objective directory, parameters can be edited within
the display boxes (those parameters not to be edited
will be greyed) or the drop down menus. Press the
Apply Edit button (only available for user defined
Objectives) to make the changes take effect and store
the new annotations.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
Fig. 567 Remove objective
Fig. 568 Delete objective window
Fig. 569 Show/Edit objective
ZEISS
405