Zeiss LSM 880 Operating Manual page 564

ZEISS
(2) Recording panel
Before recording a command sequence, you can enter the name for the macro to be created in the
Name input box of the Recording panel.
Start button:
Cancel button:
Stop button:
Edit On Stop:
Fig. 7 Recording section
• Then perform the operations to be stored, e.g.:
− Click on the LSM Auto Exposure action button. A find scan will be performed.
− Click on the LSM New action button. A new Image Display window will be opened.
− Click on the LSM Snap action button. A scan will be performed.
• Then click on the Stop button to end the recording (Cancel enables you to cancel recording).
− If recording was successful, the entered Name will then also be available in the Macros list box of
the Macro panel. The new macro is automatically assigned to the current project. It is possible to
assign as many macros as required to a project.
• Click on the Save button to store the new macro.
Proceed as follows to run a macro:
• Select the required macro from the Project list box of the Macros panel.
• Click on the Run button to start performing the macro.
Provided that a macro is linked to a list in the Macro section of the Menu Bar, you only need to
click on its name to perform it.
Proceed as follows to delete a macro:
• Select the required macro from the Project list box of the Macros panel.
• Click on the Delete button. The macro will be removed from the list.
6
CHAPTER 2 - MACROS AND VISUAL BASIC
Starts recording.
Cancels the recording procedure.
Stops recording.
On stopping the recording procedure, the macro editor is automatically opened
at the relevant position.
000000-2071-464
Macros
Proceed as follows to record a macro:
• Enter a name for the macro to be created under
Name in the Recording panel (see Fig. 7).
• Click on the Start button to start recording the
macro.
LSM 880
10/2014 V_01