Zeiss LSM 880 Operating Manual page 466

ZEISS Center Screen Area / Image Containers - Display and Image Analysis
Fig. 648 Clipping planes settings
Show Plane hides or displays the plane.
A plane can cut away information whilst being "invisible".
For distance or angle measurements on a clipping plane the plane has to be displayed and a
color has to be chosen for the clipping plane.
The appearance of the plane can be selected from a drop-down menu (see Fig. 647).
Clip names a row of toggle buttons switching between different clipping modes as named on the
buttons
Fig. 649 Sliders Pitch, Yaw and Position
460
CHAPTER 1 - SYSTEM OPERATION
Clipping Planes Settings
Activate or deactivate the clipping functionality
globally by the check box Enable clipping.
in the default mode (opaque surface, colored
outlines, clipping planes active, no clipping).
With the Plane tabs the planes can be addressed
individually and their settings can be adjusted
independent from each other.
Outline displays or hides the colored outlines. The
actual color can be chosen from a color chooser
for each plane individually.
.
Using the Pitch, Yaw, and Position sliders each
plane can be freely orientated in three-dimensional
space.
000000-2071-464
displays the three clipping planes
10/2014 V_01
LSM 880