Filter Cube Selection; Objective Selection - Zeiss LSM 880 Operating Manual

ZEISS
Fig. 100

Filter cube selection

Fig. 101 Objective selection – appearance of
Laser WF imaging mode
86
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
5.2.7.2
The filter cube can be selected from the reflector turret via a
graphical pop-up menu when the Filter cube button is
pressed (Fig. 100).
There are six positions for the filter cube. 2 positions (positions
1 and 2) are for push and click filters. None (no filter cube) is
needed for the LSM imaging mode and must be assigned to
position 1 as this position wil be automatically selected in the
LSM imaging mode. The other position (position 2) can be
equipped with a cube that is suitable for widefield excitation
and observation through the eyepieces.
000000-2071-464
Filter Cube Selection
5.2.7.3

Objective Selection

The objective can be selected via the graphical
pop-up menu when pressing the Objective button
(Fig. 101).
Those objective, which are suited for a certain
imaging mode are highlighted, but all objectives
can be selected.
LSM 880
10/2014 V_01