Display - Zeiss LSM 880 Operating Manual

LSM 880 Center Screen Area / Image Containers - Display and Image Analysis
(5) Dimensions – Positions
When clicking Positions a crosshair will be displayed at the cursor position in the image. With a mouse
click the position of the crosshair in the image will be added to the Positions list in the Stage tool and the
Positions tool.
(6) Dimensions – Stage
Stage will show the cursor as a rectangle with a crosshair in the centre. With a mouse click the stage (and
therefore the sample itself) will be repositioned. The image position with the cross hair will become the
centre position of the stage and therefore the centre position of a next image
6.2.2

Display

In the Display View Option control block, the
intensity minimum can set to the Black value and
the intensity maximum to the White value of the
image using the
Clicking on the
minimum to Black and percentile value and the
intensity maximum to White and percentile value.
Activating the
minimum and maximum values automatically.
With the spin-boxes you can set the lower
and upper percentile values.
The Black, the Gamma and the White values of the displayed image can be adjusted (Fig. 603)
individually.
With the
channel or be applied to all channels. By default, the settings apply to all channels simultaneously.
The parameters can be changed using the spin-boxes – or directly by typing in numbers in the number-
field. With the button, the original settings are easily re-set.
The settings in this View control block apply only to the Image Display and are NOT changed in the
original data set. To write the changed settings to the image data set, use the Burn in Brightness and
Contrast function in the Processing tab (section Processing Tab).
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
button.
button sets the intensity
check box sets the intensity
buttons, the effect of the settings can be restricted to an individual
000000-2071-464
Fig. 603 View Options control block -
Display
ZEISS
427